Due to changes from our supplier, we regret that the System IV and ELC 5 control systems are no longer available. However, the less expensive T6 control system can be used as a replacement. It has more programming power-   yet it's easier to understand. Trol Systems offers to assist you in translating a System IV / ELC 5 program to operate the T6. 

Please call our Engineers at: 717-939-7593

 

Comparison of the T6 to System IV & ELC 5      

T6 ELC 5 System IV
year of introduction 2000 1993 1985
number of inputs & voltage 6, self powered 12vdc 8, self powered 12vdc 8, self powered 12vdc
configuration of inputs sinking, 2 common sinking, 4 common sinking, 8 common
number, rating of outputs 4 relay, 5amp/230vac 8 relay, 10amp/115vac 8 relay, 10amp/115vac
configuration of outputs 1 bank of 4, all N.O. 2 banks of 4, all N.O. 8 individual, N.O.&N.C.
output leakage (off)  current none 5ma. 5ma.
expandability 54inputs / 36outputs 24inputs / 24outputs not available
remote panel display 8 timer/counter, 15 message 24 timer+counter, no messages not available
analog I/O expansion 0-10v input, 0-100% output not available not available
power requirements 115 or 230vac or 12-24vdc 12vac (external transformer) 12vac (external transformer)
max. program size 575 steps 24 channels 8 channels
no. timers, range (seconds) >500, .01 to 50,000 24, .1 to 3000 8, .1 to 999,999.9
size in inches (LWH) 2.2 x 3.0 x 4.3 9.0 x 5.75 x 1.5 9.0 x 5.75 x 1.5
mounting 2 screw or DIN rail 4 screw 4 screw
programming method pocket programmer or PC built-in built-in

Click here to check out the T6