Power Supplies

Note: power supply sections are used to support input sensors and output load devices, they are not required by the standard 115vac T6 controller.

Power Requirements

PS-12-115 115vac, 50/60hz @ .2A (full load)

PS-24-115 115vac, 50/60hz @ .1A (full load)

PS-12-230 230vac, 50/60hz @ .1A (full load)

PS-24-230 230vac, 50/60hz @ .05A (full load)

Tolerance         + 10% of nominal AC supply voltage

Supply Type    linear regulated (non switching), fully isolated

Isolation          1000v magnetic isolation

Physical Size        2.9" (75mm) x 2.2" (55mm) x 4.3" (110 mm)

Mounting          DIN rail or panel (with two #6 screws)

Weight      16 oz. (454 grams)

Temp         20 - 140 F, 90% r. humidity (non cond.)

Origin     Designed and assembled in the USA.


Output Power 12 watts @ 80F ambient

Regulation 5% of nominal DC rating

Ripple less than 1% @ half load, 15% @ full load

Protection Electronic thermal overload

Rise Time 500ms, no overshoot

Drop Time 3 seconds w/ no load

Go to specifications directory.

Go to price list page.